How to Operate & Run Samples on Your Manual Injector HPLC

How to Operate & Run Samples on Your Manual Injector HPLC

For instructions on how to warm up, shut down, and run samples on your HPLC, please read the attached PDF.
    • Related Articles

    • How to Calibrate your HPLC - Agilent 1220 Manual Injector

      Calibrating the HPLC Purpose ​This document details how to properly calibrate an Agilent 1220 Manual Injection HPLC to deliver accurate results for cannabis potency testing. Responsibility It is the responsibility of the client to ensure that the ...
    • How to Prepare Gummy Samples for HPLC Analysis

      Gummy Cannabinoid Extraction  This cannabinoid extraction process utilizes the QuEChERS (quick, easy, cheap, effective, rugged, and safe) method. The two solvents used will be acetonitrile and water. The salts used to aid in the extraction of ...
    • How to Prepare Flower and Oil Samples for HPLC Analysis

      Ionization Labs - Flower & Oil Sample Preparation  Purpose This procedure details how to properly prepare HPLC samples from cannabis flower material and oil material. Scope This applies to all flower and oil samples prepared at the Ionization Labs ...
    • How to Change Mobile Phase Bottles on an HPLC

      Changing Mobile Phase Bottles  Purpose The purpose of this procedure is to correctly change mobile phase bottles on an HPLC. Scope This procedure applies to HPLC instruments used by Ionization Labs and its clients. Responsibility It is the ...
    • How to Calibrate your HPLC - Agilent 1220 Autosampler

      Calibrating the HPLC Purpose This document details how to properly calibrate an Agilent 1220 Autosampler HPLC to deliver accurate results for cannabis potency testing. Responsibility It is the responsibility of the operator to ensure that the ...